PAGE 12
CONNECTIONS
Connecting to Surround Sound System (Cont’d)
Enjoying Dolby Pro Logic Surround Sound
VIDEO
OUT
VIDEO
OUTPUT
L
R
S-VIDEO
OUT
Pr
Pb
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
AUDIO
OUT1
AUDIO
OUT2
L
R
S-VIDEO
COMPONENT
Y
To AUDIO OUT
To VIDEO OUT
Video cable
Connection example
Receiver equipped
with Dolby Pro
Logic Surround
Front
speaker
(left)
Front
speaker
(right)
To video input
Rear speaker
(left)
Rear speaker
(right)
TV
Center speaker
To audio input
Audio cable
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD
player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the
speakers (Refer to “Selecting Digital Audio Output” on page 22).
Dolby Pro Logic Surround
If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram.
Connect one or two rear speakers.
Note: The surround effect is greatly
enhanced by using two surround speak-
ers
●
With a receiver equipped with Dolby Digital
Connect the equipment the same way as described in “Enjoying Dolby Digital Sound” on the previous page. Refer to that
receiver’s owner’s manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.