Connections
GB
10
VIDEO
OUT
VIDEO
OUTPUT
L
R
S-VIDEO
OUT
COAXIAL
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
AUDIO
OUT
S-VIDEO
COMPONENT
TV
CONNECTING TO THE SURROUND SOUND SYSTEM
To VIDEO OUT
Video cable
To AUDIO OUT
Audio cable
To audio input
Connection example
Receiver equipped with
Dolby Pro Logic Surround
To video input
Front Speaker (left)
Front speaker
(right)
Centre speaker
Rear speaker (left)
Rear speaker (right)
WITH A RECEIVER EQUIPPED WITH DOLBY DIGITAL
Connect the equipment the same way as described in Enjoying Dolby Digital Sound on page 9. Refer to that receiver’s owner’s manual and set the
receiver so you can enjoy Dolby Pro Logic Surround sound.
WARNING
Do not set the Digital Audio Output of this DVD player to Dolby Digital unless you are connecting the DIGITAL OUT jack of this DVD player to an AV
decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital
Audio Output on page 20).
ENJOYING DOLBY PRO LOGIC SURROUND SOUND
If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram.
Connect one or two rear speakers.
Note: The surround effect is greatly enhanced by
using two surround speakers
TV
R
Y
Pb
Pr
COMPONENT
VIDEO OUT
PROGRESSIVE
SCAN