31
button.
Caution
- Do not set the start time to 23:00 for DLS.
- DLS cannot be applied if the date of BEGIN and END is the same.
CLIENT ACCESS
Enable/Disable remote access through the network.
NTP
NTP (Network Time Protocol) which synchronizes the time of the computer
systems over variable-latency data networks.
PRIMARY SNTP SERVER
: Input the address of the primary NTP time-
server.
SECONDARY SNTP SERVER
: Input the address of the secondary NTP
time-server.
TIME ZONE
: NTP synchronizes with GMT (Greenwich Mean Time)
regardless of Geography user must set their own time difference.
CONNECTON MODE
: Select the NTP time-server connection mode from
TIME, INTERVAL, and ONCE.
CONNECTION PERIOD
-
TIME
– Refresh the time at the designated time (e.g. 1AM)
-
INTERVAL
– Every 1 hour ~ 24 hours
-
ONCE
– Synchronizes time only once. NTP will not synchronize
unless the Connection Mode is changed.
DVR sends E-MAIL Notification when the NTP server time is faster than
the system time with bellow message.
“NTP server time is faster than the system time.
In this case, NTP server time is ignored to protect the user data.
User must set the time manually.
SYSTEM TIME: Mon Oct 10 13:46:49 2011
SERVER TIME: Mon Oct 10 13:33:12 2011
DVR ID: DVR
IP ADDRESS: 172.16.2.46”
SEND EMAIL
Enable/disable the send e-mail function.(ON/OFF)
