8
Specifications
EQUALIZER:
Equalizer Control Bands
1X31, 1/3 Octave ISO Spacing From 20Hz to 20KHz
2X31, 1/3 Octave ISO Spacing From 20Hz to 20KHz
2X15, 2/3 Octave ISO Spacing From 25Hz to 16KHz
Filter Type
Constant.Q.
Slider Travel
20mm (Center Detent) for GEQ 131/215/231
Level Control Range
+/-12dB.
INPUTS:
Type
Active.Balanced/Unbalanced.
Connectors
3-Pin.XLR,.1/4”.TS.(Balanced)
Impedance
.
40K Ωs Balanced; 20K Ωs Unbalanced
Maximum Level
28dBV.
OUTPUTS:
Type
.
Unbalanced.
Connectors
3-Pin.XLR,.1/4”.TRS.
Impedance
Typically < 400 Ωs
Maximum Level
+/-20dBV
Clip LED Threshold
3dB.(Below.Clipping).
Low Cut Filter
40Hz, 12dB/octave
Frequency Response
20Hz - 20KHz, +/- 1dB
THD + Noise
<0.008% (@ 1KHz, all faders at mid position)
Signal to Noise Ratio
95dB (@ 1KHz)
Channel Separation
60dB (1KHz)
Line Voltage
100-130V AC, 50/60Hz
Power Consumption
Maximum:.15.watts.
SIZE:
19” W X 3.5” H X 5” D (2U)
(48.2cm.X.8.8cm.X.12.7cm).For.231
19” W X 1.75” H X 8.66” D (1U)
(48.2cm.X.4.4cm.X.12.7cm).For.GEQ.131/215
WEIGHT:
4.15lbs..(1.9Kg.).GEQ.215.
4lbs..(1.81Kg.).GEQ.131.
6.85.lbs..(3.1Kg.).GEQ.231.
The specifications above are correct at the time of printing of
this manual. For improvement purposes, all specifications for
this unit, including design and appearance, are subject to
change without prior notice.
