Nady Audio SRM SERIES, Owner'S Manual

S P E C I F I C AT I O N S

3. FREQUENCY RESPONSE

ANY INPUT TO 
ANY OUTPUT ....................20 Hz to 20 KHz =/- 3dB @ 0 dBm

4. TOTAL HARMONIC DISTORTION

ANY INPUT TO 
ANY OUTPUT ..............0.02%, 20 Hz-20 KHz @ 1Khz, 0 dBm

5. INPUT CHANNEL EQUALIZATION

High shelving  ....................12 kHz, +/- 15 dB, Q fixed at 2 oct.
Mid bell  ............................2.5 khZ, +/- 15 dB, Q fixed at 1 oct.
Low shelving  ......................80 Hz, +/- 15 dB, Q fixed at 2 oct.
Low Cut (High Pass)
filter (Mono channels only)............75 Hz, -3 dB (18 dB/octave)

6. GAIN CONTROL RANGE

Mono input channel
trim control............................Stop to stop- Mic +10 dB~+60 dB 
Channel/Master Faders ...................................... -

∞

to +15 dB

Aux Send ..............................................................Off to +15 dB
Aux Return ..............................................Off to Unity to +15 dB 

7. CROSSTALK @ 1KHZ

ADJACENT CHANNEL INPUTS ......................-78 

dB~-68 

dB

INPUT TO OUTPUT .......................................... -78 dB~-68 dB

8. HUM AND NOISE

20 Hz-20 Khz, Rs=150 ohms, input TRIM @ 0 dB, input sensi-
tivity at –60 dB
EQUIVALENT INPUT NOISE ....................................-129 dBm
RESIDUAL OUTPUT NOISE........................................-85 dBm

9. VU METERS 

10-segment LED X 2

10. PHANTOM POWER

+48 VDC, globally selected

11.  POWER REQUIREMENTS

External PSU, 120 VAC/60Hz or 230 VAC/50Hz

12.  POWER CONSUMPTION

25 Watts, External PSU

13.  DIMENSIONS AND WEIGHT

SRM-12X: 13.5" x 11.5" x 3" (343 x 292 x 76 mm), 
7.9 lbs (3.7 Kg)
SRM-14X: 13.5" x 13.5" x 3" (343 x 343 x 76 mm), 
9.3 lbs (4.2 Kg)  
External PSU not included

1. INPUT SECTION

Input                                        Connector              Input Impedance         Nominal Level               Max Level

MONO CH MIC

XLR

>1.3K 

Ω

+2 dBm

+14 dBm

MONO CH LINE

1/4" TRS

>10K 

Ω

+4 dBm

+22 dBm

STEREO CH LINE

1/4" TRS

>10K 

Ω

+4 dBm

+22 dBm

TAPE IN

RCA PIN JACKS

>10K 

Ω

+2 dBm

+22 dBm

AUX RETURNS

1/4" TS

>10K 

Ω

+4 dBm

+22 dBm

INSERT IN

1/4" TRS

>10K 

Ω

+4 dBm

+22 dBm

2. OUTPUT SECTION

Output                                       Connector            Output Impedance        Nominal Level            Max Level

STEREO OUT L/R

XLR & 1/4" TS

120 

Ω

+4~+6 dBm

+22 dBm

AUX SENDS 1,2 

1/4" TS

120 

Ω

+4~+6 dBm

+20 dBm

INSERT OUT

1/4" TRS

120 

Ω

+4~+6 dBm

+22 dBm

CNTRL R. OUT

1/4" TS

1K 

Ω

+4~+6 dBm

+22 dBm

REC OUT

RCA PIN JACKS

1K 

Ω

+4~+6 dBm

+22 dBm        

PHONES

1/4" TRS

200 

Ω

–––

40mW X 2

12

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.