background image

11

seRvICe InfoRMaTIon

In the U.S. 

If you are experiencing operational problems with your system, please refer to the Support page at 

www.nady.com for assistance. Should your wireless system require service, please contact the Nady Service 

Department at (510) 652-2411 for a Return Authorization (R/A) Number and service quote (if out of warranty). 

Make sure the R/A Number is clearly marked on the outside of the package that you are returning.

If your unit is out of warranty, please enclose a cashier’s check or money order (or pay by credit card) 

per instructions by the Nady Service Department. Ship your unit prepaid to: Nady Systems, Service 

Department, 6701 Shellmound Street, Emeryville, CA 94608. Include a brief description of the problem you 

are experiencing. For service of a unit under warranty, please follow the instructions in the following section.

Outside the U.S. 

For service and warranty matters please contact the Nady distributor in your country 

through the dealer/store from which you purchased this product.

Do not attempt to service this unit yourself as it can be dangerous and will also void the warranty.

one YeaR lIMITeD WaRRanTY

Nady Systems, Inc. warrants to the original consumer purchaser that the above unit is free from any defects in 

material or workmanship for a period of one year from the date of original retail purchase. If any such defect is 

discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge, subject 

to verification of the defect or malfunction upon return to Nady Systems.

To the extent permitted by law, any applicable implied warranties, including warranties of merchantability 

and fitness are hereby limited to one year from the date of purchase. Consequential or incidental damages 

resulting from a breach of any applicable express or implied warranties are hereby excluded. This warranty 

is in lieu of all other agreements and warranties, general or special, express or implied and no representative 

or person including a Nady dealer, agent, or employee is authorized to assume for us any other liability in 

connection with the sale or use of this Nady Systems’ product.

Whereas some states do not allow limitations on how long implied warranties last, and do not allow exclusion 

of incidental or consequential damages, the above limitations and exclusions may not apply to you. This 

warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

This warranty is subject to the following conditions:

1) This system must have been purchased from an authorized Nady dealer and all warranty service must be 

performed by Nady’s service department. Any service not performed by Nady will automatically void this 

warranty.

2) Items not covered: physical damage resulting from improper handling of the unit in transit from the factory 

by the shipper (Nady Systems is not responsible for such damage and all such claims must be made against 

the shipping company by the consignee.); defects caused by normal wear of the product (expendable parts 

are typically connectors, cables, potentiometers, switches and similar components); damage or defects 

caused by abuse, neglect, accident, failure to connect or operate the unit in any way that does not comply 

with applicable technical or safety regulations, or improper repair, excessive heat or humidity, alteration or 

unreasonable use of the unit, causing cracks, broken cases/housings or parts; damage caused by leaking 

batteries; finish or appearance items; items damaged in shipment en route to Nady Systems, Inc. for repair. 

The warranty is null and void if any Nady serial number has been removed or defaced.

How To Obtain Service:

1) If factory service is required, you must contact our Service Department at (510) 652-2411 for a return 

authorization (R/A) number. Make sure the R/A number is clearly marked on the outside of your package. 

(Please note: if an R/A number is not included, our Shipping Department cannot accept your package.)

2) Send the unit back to Nady Systems, Inc., 6701 Shellmound Street, Emeryville, CA, 94608, freight pre-paid.

You must include proof of date and place of purchase (i.e., photocopy of your bill of sale) or Nady cannot be 

responsible for repair or replacement. Nady Systems, Inc. will not repair, nor be held responsible, for any units 

returned without proper identification, return address, and RA number clearly marked on the package.

3) Per the above, Nady will perform all warranty service and return the unit to you at no charge. Nady Systems 

will inform the buyer if product sent in does not meet the terms of this warranty and will provide a quote for 

fixing the unit and/or shipping it back exclusively at the buyer’s expense.

Summary of Contents for 401X Quad













Reviews: