background image

4

Nady Systems Inc. 

PAS-300BT PORTABLE SOUND SYSTEM

• 

 Ultra compact portable PA system with 2 speakers and detachable 8-channel   

 

powered mixer

• 

 Lightweight (21 lbs) for easy transport and set up. Speakers are pole mountable on  

 

optional SPST-1A speaker stands.

• 

 Dual 150W Class D amplifier, with built in peak limiter

• 

Full range 10” woofers and 1” titanium high-frequency drivers

• 

XLR mic, ¼” line , and stereo RCA inputs. All inputs with 2  

 

band EQ, reverb, and level controls, L/R stereo and monitor outputs.

Built-in media player with USB/SD/Bluetooth playback functionality

 

• 

Rear storage compartment for cables and accessories

SAFETY TIPS & WARNINGS:

1.

When using this electronic device, basic precautions should always be taken, including   
the following: read all instructions before using the product. 

2.

Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a    
wet basement, or near a swimming pool, etc.). 

3.

This product should be used only with a cart or stand that will keep it level and stable    
and prevent wobbling. 

4.

This product, in combination with headphones or speakers, may be capable of  
producing sound levels that could cause permanent hearing loss. Do not operate for a   
long period of time at a high volume level or at a level that is uncomfortable. If you  

 

experience any hearing loss or ringing in the ears, you should consult an audiologist. 

5.

The product should be positioned so that proper ventilation is maintained. 

6.

The product should be located away from heat sources such as radiators, heat vents,    
or other devices (including amplifiers) that produce heat. 

7.

The product should be connected to a power supply only of the type described in the    
operating instructions or as marked on the product. 

8.

The power supply cord should: (1) be undamaged, (2) never share an outlet or  
extension cord with other devices so that the outlet’s or extension cord’s power rating 
is exceeded, and (3) never be left plugged into the outlet when not being used for  
a long period of time. 

9.

Care should be taken so that objects do not fall into, and liquids are not spilled  

 

through, the enclosure’s openings. 

10.

The product should be serviced by qualified service personnel if:  

a.  The power supply cord or the plug has been damaged.    
b.  Objects have fallen into, or liquid has been spilled onto the product.  

 

c.  The product has been exposed to rain.  
d.  The product does not appear to operate normally or exhibits a marked  
     change in performance.  
e.  The product has been dropped, or the enclosure damaged. 

11.

Do not attempt to service the product beyond what is described in the user  
maintenance instructions. All other servicing should be referred to qualified  
service personnel. 

SYSTEM FEATURES

Summary of Contents for PAS-300BT













Reviews: