Offering the proven advantage and convenience of wireless operation,
the WPM-2U wireless podium microphone is the most practical option
in many podium, lectern and desktop conferencing applications.
Thank you for choosing the Nady WPM-2U UHF wireless podium microphone, we
know you will be very pleased with its performance and features. The WPM-2U
was developed using the expertise of professional sound engineers. You will find
your new UHF wireless podium microphone has superior performance and greater
flexibility than any other podium microphone in its price range.
Features
USER GUIDE
WPM-2U
UHF Wireless Podium Microphone
• Superior, clear audio for best possible communication
• Up to 200’ ultra reliable reception range for utmost
versatility and operating ease in any application—simplifies
setup with no cumbersome cabling required between mic
and amplifier
• Offering top performance indistinguishable from the best
hard-wired podium microphones
• Ideal for desktop conferencing, with no clutter of cables,
for the cleanest, simplest possible installation
• Up to six WPM-2U systems (all on different frequencies)
can be operated simultaneously at the same time (up to
14 total if combining the UHF and WPM-1V VHF systems)
• For use with a UHF-3 receiver on the same frequency
only (sold separately or a combined system or multi-channel
systems)
Controls
(1) AUTO MUTE (POWER ON/OFF) SWITCH
This switch is used to turn the audio ON or OFF. Use as needed for easy control of
the mic while operating with intermittent audio ON requirements during a continuous
use application. This switch also turns the transmitter ON/OFF, but only if the MAIN
POWER ON/OFF SWITCH is ON. For proper operation and audio on, both the MAIN
POWER ON/OFF SWITCH and the AUTO MUTE (POWER ON/OFF) SWITCH must be
in the ON position.
(2) LED INDICATOR
This LED lights green when the unit is powered ON and the batteries are useable.
When it turns orange it indicates the batteries are low and must be replaced.
(3) MICROPHONE
This unidirectional microphone is designed to pick up sound sources directly in
front of it. It plugs into the base through the XLR connector. The base of the neck is
adjustable and easy to bend in any direction. Speak into the mic from a distance of 6”
to 12” for optimum performance. Also follow the instructions in the manual for the
accompanying wireless receiver for proper setup of the audio signal from the receiver.
(4) BATTERY COMPARTMENT
The unit is powered by two alkaline or rechargeable NiCad or NiMH AA (1.5V)
batteries. Replace when the LED INDICATOR lights orange.
(5) MAIN POWER ON/OFF SWITCH
This is the main power switch which turns the transmitter ON/OFF. It must be
turned on first to power the unit. Always leave this in the OFF position when not
using the unit.
4
5
1
2 x AA
3
2
