SNR-CI-H Series
Network IP Cameras User Manual
15/ 32
3 W iFi function settings of IP camera:
(1) W ireless network on/off
Select this switch will enable W i-Fi function of IP camera.
(2) IP address
Set the wireless IP address of IP camera, e.g. 192.168.1.160.
(3) Gateway
Set the IP address of current wireless gateway, e.g. 192.168.1.1.
(4) SSID number:
It is the login name of W i-Fi for identity authentication, it must be the same as the
SSID number of the wireless router (e.g. zhangl).
(5) Password
It is the login name of Wi-Fi for identity authentication, it must be the same as the
key of the wireless gateway (router/AP).
(6) Master authentication encryption type
Three encryption types are W EP, WPA and WPA2. Its selection must be the same as
the security type setting of wireless gateway (router/AP).
(7) Auxiliary encryption mode
WEP security type: developing system, sharing key and auto-selection
WPA, WPA2 security type: TKIP and AES
It must be the same as the security option setting of wireless gateway (router/AP).
After setting completes, save all parameters. Then disconnect the network cable, IP camera
can be visited via wireless IP, such as 192.168.1.160.
Note:
The wireless network IP address and cable network IP address cannot be in the same
segment.
The W i-Fi switch appears to be grey when IP camera doesn't have W i-Fi function.
[DDNS settings]
Bind the device with a fixed domain name by DNNS setting so that visiting to the device can
be realized no matter how the public IP changes.
(refer to Appendix 3 for detailed steps)
DDNS On/Off: enable or disable DDNS function.
Zhangl is the SSID number for
identity authentication of WiFi
Security setting is the password
for identity authentication.
The
password is empty if this option
is not checked
Check this option to enable WiFi
function
