SNR-CI-H Series
Network IP Cameras User Manual
18/ 32
Data mapping port: data mapping port of user-specified device on the router(works only under
specified mode).
Web mapping port: web mapping port of user-specified device on the router(works only under
specified mode).
Data mapping port status: W hen UPNP function runs successfully, the status bar will echo the
data port mapped to the router by the device.
Web mapping port status: W hen UPNP function runs successfully, the status bar will echo the
web port mapped to the router by the device.
After setting all the parameters, click
[save]
to make the parameters valid.
[RTSP settings]
RTSP on/off: check RTSP switch to enable RTSP function.
RTSP port: default port is 554.
With RTSP function enabled, users can review the audio and video streams in real time via
players that supports standard RTSP protocol
(e.g. VLC, Quicktime).
[Public IP mail notification]
Mail notification on/off: check this switch to enable public IP mail notification function.
Interval: select the interval of public IP mail notifications.
After enable this function, when the device starts or detects public IP change, it will send
notification mail to
the mail address set in “mail settings”.
5.5 User Management
See below for IP camera user manager settings interface:
You can set three users for every camera, one is Administrator, the others are general users.
Administrator authority: can operate and set all functions and parameters of IP camera
General user authority: (1) can perform operations like snapping, recording, playback,
talkback, monitoring, alarm clearing, log searching, zooming and
full-screen reviewing;
(2) Can perform operations like visit setting, image lightness and color
adjustment, PTZ and lens control, etc.
Note: User name and password must be 1-16-character-strings consisted by letters,
numbers, underlines or dots. The characters are case sensitive.
Default user name of administrator: admin Password: admin
Default user name of general user: user 1 \user 2 Password: user 1 \user 2
Note: user name and password are case sensitive
