background image

Power Supply Units

 

 

 

 

           

NAGASIMA ELECTRONIC EQUIPMENT     

www.neecatv.com

 

Tel

+86-592-5771182      Fax: +86-592-5032560      Email: neecatv@vip.sina.com 

- 2 -

Safety Precautions 

 

 

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK OR ANY OTHER 

POSSIBLE FATAL ACCIDENT CAUSED BY IMPROPER OPERATIONS OR   

HANDLINGS, BE FULLY AWARE OF ALL THE FOLLOWING PRECAUTIONS.   

             

 

             

 

 

PRECAUTIONS:  

 

 

REFER TO USER’S MANUAL BEFORE WORKING WITH THIS UNIT.   

 

 

INSTALLATION AND/OR OPERATION OF THE UNIT MUST BE PERFORMED ONLY BY QUALIFIED 

PERSONNEL.  

 

 

ALWAYS USE PROPER LIFTING TECHNIQUES WHENEVER HANDLING THE UNIT.   

 

 

DO NOT CONNECT THE AC INLET WHILE SERVICING THE UNIT OR INSTALLING THE UNIT.   

 

 

ALWAYS WEAR INSULATING GLOVES AND FACE SHIELD WHENEVER WORKING WITH THE UNIT.   

 

 

THE UNIT MUST BE WELL EARTHED BEFORE PROCEEDING WITH INSTALLATION OR 

OPERATION. FAILURE TO DO SO CAN CAUSE ELECTRICAL SHOCK.   

 

 

THE UNIT SHOULD BE PLACED UPRIGHT DURING INSTALLATION AND OPERATION SO AS TO 

DISPERSE HEAT GENERATED BY THE UNIT.   

 

 

HOUSING OF THE UNIT IS POLE-MOUNT. ITS INSTALLATION MUST BE FIRM AND RELIABLE TO 

PREVENT FALLING FROM POLE.   

 

 

PLACE FOR INSTALLATION OF THE UNIT MUST BE VENTILATED AND AWAY FROM FLAMMABLE, 

EXPLOSIVE AND CORROSIVE MATERIAL.   

 

 

WIRING OF THE UNIT AND CONNECTION OF OUTPUT PORTS MUST BE FIRM AND RELIABLE. 

FAILURE TO DO SO MAY CAUSE FIRE.   

 

 

VERIFY INPUT VOLTAGE OF UNIT AND THEN GIVE THE UNIT CORRECT INPUT VOLTAGE 

BEFORE POWERING IT ON.   

 

 

ALWAYS REFER TO SUPPLIER’S RECOMMENDATION WHENEVER REPLACING SPARE PARTS OF 

THE UNIT.   

 

 

UNAUTHORIZED ALTERATION OR REPAIR IS NOT ALLOWED. IT MAY CAUSE UNREPAIRABLE 

TROUBLES. THE SUPPLIER DOES NOT ASSUME ANY RESPONSIBILITY FOR THESE KINDS OF 

TROUBLES.  

 

 

WHEN THE UNIT IS WORKING, PLEASE TAKE OUT FUSE OF OUTPUT PORT, WHERE OUTPUT 

VOLTAGE IS NOT PRESENT.

 

 

 

A DANGEROUS VOLTAGE EXISTS INSIDE THE POWER SUPPLY. USE 

EXTREME CAUTION.   

IMPORTANT INSTRUCTIONS IS PRESENT WITHIN THE 

TECHNICAL MANUAL.   

Summary of Contents for N2322-15






Reviews: