1.
ZERO
2.
TARE
TARE
3.
4.
5.
MODE
6.
Key pad function:
Note: 1. Hi/Lo key : to be confirmed key or skip .
2. NW/GW key: to be right movement key.
3. ZERO: to be value increasing key.
HI
LO
NET
GROSS
ON
OFF
Page 2
Press this key to return the display to a zero reading.
To deduct the weight of a container.
1. Ensure that there is no weight on the weighing platform.
2. Place an empty container on the scale platform.
3. Press "TARE" key to deduct the weight of the empty container.
4. Place a weight in the container to obtain the net weight of the item.
5. To clear the tare function, simply press "TARE" key again.
6. The tare indicator light is on when the tare function is activated.
7. The tare range is from capacity 0kg to the scale's maximum capacity.
8. To review net weight or gross weight, press "NET/GROSS" key to display
gross weight, when press "NET/GROSS" key again to display Net weight.
Preset required high and low limited weight, when reaches the weight.
There is a beep sound to warn the user.
( Ex. To set high weight: 3.000kg, low weight: 1.200kg ).
Press "HI/LO" key , when displays input 1.200
Press "HI/LO" key , when displays input 3.000
Press "HI/LO" key again , finished.
( You may use "ZERO" key to increase value or "NET/GROSS" key to move )
1. While at tare mode, press "NET/GROSS" key to display net weight and gross
weight value.
2. Press "NET/GROSS" key lasting 3 seconds, scale will go into LED brightness
adjustment, use "ZERO" key to select brighter or darker, when press
"NET/GROSS" key again to confirm setup.
Unit weight conversion. ( kg or lb )
Unit weight will be stored at next operation.
Power turn ON/OFF.
To deduct the weight of a container.
1 Ensure that there is no weight on the weighing platform.
2. Place an empty container on the scale platform.
3. Press TARE key to deduct the weight of the empty container.
4. Place a weight in the container to obtain the net weight of the item.
5. To clear the tare function, simply press the TARE key again.
6. The Tare indicator light is on when the tare function is activated.
7. The tare range is from capacity 0kg to the scale's maximum capacity.
8. To review net weight or gross weight, press NW/GW key to display
gross weight, when press NW/GW key again to display Net weight.
1.
Press this key to return the display to a zero reading.
ZERO
ZERO
2.
TARE
TARE
3.
4.
1.While at tare mode, press NW/GW key to display net weight and gross
weight value.
2. press NW/GW key lasting 3 seconds, scale will go into LED brightness
adjustment, use ZERO key to select brighter or darker, when press NW/GW
key again to confirm setup.
5.
Unit weight conversion. (Kg or lb)
MODE
6.
Prepare key.
(When perform Rs232 function to use as confirm key to send weight
data to computer)
Unit weight will be stored at next operation.
Key pad function:
ENTER
Press Hi/Lo key, when displays
Press Hi/Lo key, when displays
input 3.000
Press Hi/Lo key again, finished.
(You may use ZERO(+) to increase value or NW/GW key to move)
(Ex. To set high weight: 3.000kg, low weight: 1.200kg.)
Input 1.200
(1) Preset required high and low limited weight, when reaches the weight.
There is a beep sound to warn the user.
Note: 1. Hi/Lo key : to be confirmed key or skip .
2. NW/GW key: to be right movement key.
3. ZERO: to be value increasing key.
HI/LO
NW/GW
