13
Frequent misstapling or two staples in one position
Insufficient staple quality:
Use original NAGEL-Staples.
Incorrect staple type:
Use original NAGEL-Staples, types 26/6
or Ri 26/6 only.
Driver blade (16) has been put in the
wrong way round:
Put in the driver blade with the mark „26“
showing towards the rear side of the ma-
chine.
Residues inside staple channel:
Take off stapling head, remove both
screws of front plate (18), take off front
plate. Clean staple channel and reas-
semble the stapling head.
Driver blade (16) is scratched or bent:
Put in a new driver blade.
Button „START“ (6) is being pushed
without paper inside the machine:
Remove jammed staples from the anvils
and fire only with paper being inserted.
Booklet is stapled correctly but incorrectly ejected
Reduced stickiness of fold rollers because
of dirt:
Clean fold rollers.
Too many sheets have been inserted:
Do not insert more than 15 sheets.
Booklets are being stapled or folded incorrectly
The side guides (10, 11) or the back stop
(14) are fixed improperly and move a-
round:
Fix the locking screws of the side guides
and back stop properly.
The side guides (10, 11) are too far apart
from each other, allowing unparallel in-
sertion of paper:
Shift side guides more closely together.
The side guides (10, 11) are adjusted too
tightly, causing larger paper formats to
curl during folding which leads to incor-
rect stapling.
Shift side guides farther apart.
Incorrect adjustment of back stop (14):
Adjust back stop more precisely, so that
the machine folds in the center of the
sheets.
Paper is not squared up correctly:
Square up paper correctly before firing.
Summary of Contents for FOLDNAK M2
