Naggura SWOP 502, Instruction Manual

Instruction 

Manual

12

6

11

11

11

11

11

The Swop S503 is equipped with 3 engines.

Use the backrest inclination keys to tilt the bac-

krest up and down.

The height of the bed can be adjusted too. To 

lift the bed, simply push the UP button on the 

hand switch. Once the desired height is achie-

ved, realease the button. To lower it, do the 

same operation with the DOWN button. (Third 

row of keys)

You can also adjust the whole inclination of the 

bed downwards or upwards using the keys in 

the second row.  

Operation Swop503

Motors controller

Up & 

Down

Seat 

inclination

Backrest 

inclination

A foot controller is available as an option and 

it can be ordered separately. You can adjust all 

the 3 movements of the bed by means of the 

foot controller.

In order to use both the hand controller and 

the foot controller simultaneaously, you need 

a branched cable and you must plug it into the 

control box. 

See instructions in picture below.

Foot controller

Locate the control box inside the table base 

frame.  Take the safety piece that locks the 

conectors into each plug and disconnect the 

cable HS.

Connect the branched cable in the plug named 

HS. Place again the saftey piece to lock the 

connectors. 

Now you can connect the handcontroller and 

the foot controller in the two plugs.

Connecting the foot controller