background image

Instruction 

Manual

16

9. Maintenance and cleaning

Cleaning the chassis and metal frame:

Clean the table with a clean, soft and dry cloth.
For persisting stains, use a white cloth, damp it with clear water and a domestic household cleaner FREE of alcohol.

Cleaning the cushions:

The Naggura tables have a high quality Spradling vinyl protected by Permablok, against stains and abrasion.
The vinyl should be cleaned periodically in order to maintain its appearance and prevent build-up of dirt and contaminants. Any 
stains should be removed immediately.

- Cleaning after each patient: 

If desinfection after each patient is required, use one of the products “list of desinfectants”. In case of spilling massage oil, re-
move it with a PH-neutral soap immediately (1:9 liquid soap, neutral PH and water). Always remove residu with clean water after 
cleaning with soap. 

- Cleaning at te end of each day: 

In order to prevent the build-up of contaminents and grease, it is important that the surface is cleaned every day. Clean the en-
tire surface using a mixture of 1:9 liquid soap (neutral PH) and water. Do not use soap or cleaning solutions that contain alcohol, 
ketones, xylene, acetates or solvents. Always remove residu with clean water after cleaning with soap.

- Cleaning each month or in case of stains: 

Use the original Naggura Cuirnet high-performance cleaner in a dilution of 1:9 Cuirnet and water. If the stain cannot be removed, 
the cuirnet cleaner maybe be used undiluted.  
- After the cleaning, always rinse with clear water and dry.  
- NEVER use the Naggura Cuirnet cleaner for the metal frame of the table.

Maintenance

Naggura tables have been designed for an intensive use during long time thanks to its stability, reliability and durability. Howe-
ver, we advise to keep the table in perfect conditions and make a correct use of it. Unplug the table if you will not use it for a long 
period of time.

Environment information

If this symbol appears on electrical products or on its packaging, this means that they must be recycled properly. Please en-
sure that you are well informed of the local rules and regulations regarding to the removal of equipment and accessories. 

Summary of Contents for Swop Physio























Reviews: