background image

Instruction 

Manual

4

Before using the treatment table, please read the instruction manual carefully. It is important to keep this manual and store it in a 

safe place so that it can be consulted at any time.

By carefully following these instructions  you will be able to avoid any problems in using the treatment table. 

Some texts and/or illustrations may not belong to your Naggura table since they are general and  it depends on your product choice 

at the purchase time.

2. Use of the Manual

The warranty period is effective on the date of purchase of the treatment table for a period of two (2) years. It covers all the compo-

nents of the treatment table under the normal and correct use. It also covers defects in workmanship from factory.

The above-mentioned warranty does not cover defects or malfunction caused by:

- Misuse, abuse or improper maintenance of the table and its upholstery;

- Non-observance of the precautions and warnings stated in this instruction manual;

- Lack of maintenance or repair tasks carried out by non-qualified service personnel who are unauthorized by the manufacturer; 

- Wrong and faulty electrical installations or which do not fulfil the legal requirements; 

- Naggura company is not liable for incidental or consequential damage to property or business.

3. Warranty

Under any circumstances, the producer shall be liable for any indirect, special, incidental or consequential damage incurred by the 

user, the patient or the table  itself as a result of:

a. A wrong diagnosis;

b. Incorrect use of the table or any of its accessories;

c. The wrong interpretation or non-observance of this user manual;

d. A lack of maintenance of the table;

e. Or maintenance works of the table and/or repairs performed by persons unauthorized to do so by the manufacturer.

According to the current legislation, the manufacturer cannot be held responsible for any flaws in the table or its components and 

accessories after a period of ten (10) years from the date on which the producer puts into circulation the actual product. Therefore, 

producer cannot be obliged to supply any spare parts or accessories for this table.

4. Product Liability

Provided that the operator and user takes care of the table and undertakes regular maintenance tasks as described in section 9 of 

the current manual, the expected lifespan of the Naggura table can reach over 10 years from production date.

The intended use of the Treatment Table is to position a patient for the treatment. The unit is intended for use by qualified professio-

nal within a professional setting.

Expected lifespan

Summary of Contents for Swop Physio























Reviews: