8
Nagra –
Concept CD player
Audio connections
Before making any connections, ensure that the CD player and other components
are switched off.
The connection block is located either on the back panel, or on the right side of
the unit. Please contact your Nagra dealer if you wish to change its position.
Connection block
1
– Analogue output group (Not connected on CDT)
1 – XLR balanced analogue outputs
2 – RCA unbalanced analogue outputs
2
– Digital output group and power input
3 – SPDIF digital output
4 – Earth connector
5 – Toslink optical digital output
6 – AES-EBU digital output
7 – Lemo power input
3
– Device identification plate
8 – Serial number
The rear or side panel of the CD player features two output groups: analogue and
digital.
The unbalanced analogue outputs are on RCA connectors (Hi-Fi standard) and the
balanced analogue outputs are on XLR connectors. Use these analogue outputs to
connect the CD player to your integrated amplifier or to your stereo or monoblock
amplifier.
The CD player features 3 digital outputs:
- SPDIF
- AES-EBU
- Toslink optical
Use these connectors to link the CD player to an external converter, such as the
Nagra DAC.
