7
Nagra –
Classic PSU
Which output to use?
Outputs 1 to 3 are all the same. They are completely isolated from one another,
so you may connect your equipment as you wish, whether it is digital or analog.
If you have purchased the optional third output, then it is active, otherwise only
outputs 1 and 2 are used.
Connecting your Nagra gear to the CLASSIC PSU
Please note that the LEMO plug
features a red dot that must be
facing upwards for correct insertion
into the power connector.
When inserting the cable, you will
hear a click. This indicates that the
plug is securely locked.
To disconnect the DC cable, hold the indicated ribbed section of the plug and pull
backwards.
Fuse replacement
The fuse holder includes a replacement fuse (the one on the left).
The fuse type is FST 5x20 mm 250 V 1.6A and for 115 V use 3.15
A.
Should the replacement fuse blow immediately following the
original, contact your dealer for support.
