7
Nagra –
HD DAC
Rear panel connection block
1.
Ground connector (see note below)
2.
The analog output section, provides both RCA or XLR, which should
NOT be used simultaneously. The XLR outputs are unbalanced
(asymmetrical). Should you need transformer balanced outputs, please
contact your Nagra dealer.
3.
Digital inputs section (from left to right):
-
The I
2
S (RJ 45 connector) is a proprietary Nagra input
reserved for data connection to future products
-
The USB connector is for receiving digital audio from a PC or
MAC computer
-
TOSLINK is a standard optical data connection
-
Two AES / EBU XLR inputs conforming to the AES-3 standard
-
Two S/PDIF inputs, 1 on BNC, 1 on RCA
4.
DC power inputs
-
Analog, powers the analog part
-
Digital, powers the digital part
Note about the Ground connector
This connection is seldom used but may solve specific setup issues concerning
“hum”. Your Nagra dealer will assist you on when and how to use this connector.
1.
3.
2.
4.
