9
Nagra –
MPS
Fuse replacement
The fuse holder includes a
replacement fuse (the one on
the left).
The fuse type is FST 5x20 mm
250 V 630 mA and for 115 V use
1.25 A.
Should the replacement fuse
blow immediately following the
original, contact your dealer for
support.
Operating the MPS
These are the functions available from the main selector.
R
(Remote)
The MPS will be turned on and off by the remote control, or the input
trigger
,
for more information see page 13
OFF
The MPS is in standby position (the internal battery, if fitted, will recharge)
ON
The power on sequence will start, outputs 1 through 4 will be powered and then
the
AMP
output triggered, for more information about the latter see page 13
BAT
The MPS will turn ON and output 1 will be fed by the battery
The power down sequence order is simply the opposite; first the
AMP
will shut down, then
each output from 4 to 1. This allows a very smooth power on and off of the system and should
avoid any annoying clicks in the speakers.
