15
Nagra –
TUBE DAC
Input assignment
The TUBE DAC features a wide array of inputs. You may not need all of them.
To make input selection easier, you can decide which input you want to be
active, and on which IR remote control key it will be accessible. In the Menu, go
to “INPUT ASSIGNEMENT”:
INPUT
ASSIGNMENT
Press the Controller knob to display
first input and its currently selected
option.
AES
REMOTE BUTTON A
Rotating the Controller knob will
scroll through the list of inputs.
Press on the Controller knob and
the
current
option
becomes
blinking. Then rotate the Controller
knob to change the option for the
selected input.
For each input, you can select the following:
DISABLED
The input is deactivated (the input
is not displayed any longer in main
menu where you select the working
input).
REMOTE BUTTON A to F
Allocate the IR remote control key
active for the selected input.
NO REMOTE BUTTON
The input is active, but does not
have an IR remote control key
assigned to it. However, you can
select it using the Controller knob
in main menu where you select the
working input or with “-” and “+”
input selection keys on IR remote
control unit.
After selecting the desired option, press once on the Controller knob, the
selected option stops blinking, the selection is stored.