e4
mains input
and fuse
5.1 HiCap rear
socket 1
socket 2
socket 3
socket 4
ch2
-ve
ch1
nc
socket 1, 2 & 3
+ve
-ve
+ve
ch1
ch2
socket 4
5 Power supply Installation
Power supplies should be installed on an equipment rack intended for the purpose in
their final location before connecting cables or switching on. ensure that power amplifiers
are switched off and the preamplifier volume is turned down before power supplies are
switched on. Connection diagrams will be found in the appropriate product owners
manual.
many power supplies are heavy and care should be taken when lifting or moving them.
make sure that the surface on which they are to be placed can support their weight.
mains input
and fuse
mains input
and fuse
5.3 FlatCap Xs rear
5.2 XP5 Xs rear
power
out A
signal
out A
signal
out C
signal
out B
power
out B
power
switch
power
switch
signal
out D
ch2
ch1
nc
-ve
signal out
a, B, C & D
+ve
-ve
+ve
ch1
ch2
Power out
a & B
HiCap, XP5 XS, and FlatCap XS Power Supplies
multiple power output
note:
The XP5 XS can be used to power the CDS3, CDX2,
HDX, DAC, NDX and ND5 XS. It cannot be used to power
the CD555.
