Naim Audio HDX Hard Disk Player – Network Setup
4 September 2008
Page 4 of 14
Configuring the HDX networking settings
When the correct addressing mode and associated settings have been determined the HDX
can be configured. To do this the
Naim Set IP Tool
must first be installed on a PC running XP or
Vista. The HDX network settings are then reconfigured using this tool as described below.
After the HDX has been successfully configured it is advisable to make a note of the new
network settings in the back of the user manual for future reference.
Installing the Naim IP Tool Application
The HDX ships with a CD ROM that contains
documentation
, the
Desktop Client application
and the
Naim Set IP Tool
. Note that the applications on the CD ROM require either Microsoft
Windows XP or Vista to run. The application will not natively run on an Apple Mac computer
although there ways of running Windows on a Mac, which are described in the
troubleshooting section. The following steps describe the installation process using Windows
Vista.
1) Insert the Naim CD ROM into the PC drive and locate the folder containing the Naim
Set IP application installer and double click the
NaimIPTool.msi
installer icon.
