14
PROBLEM
SOLUTION
The control light does not go on.
Check that the control inlet is properly inserted and
the starting instructions of the appliance have been
correctly followed.
Check that the plug is properly inserted into the
socket and that the power supply is on.
Check that the temperature selector is correctly
positioned.
The appliance must be inspected by an
authorized Service Centre only,
to prevent any risk.
WARNING!
Do not make folds and/or deform the
appliance and be careful not to place on its top heavy
objects that could crush and damage it.
•
The wool could be non-uniform in colour or the colour could change
over a period of time and have fine graining, typical of natural fibres.
•
Fabric may turn yellow in the course of time; it is a natural process.
Appliance safety and/or performance are not jeopardized by this by this
phenomenon in any way.
DISPOSAL
For environmental reasons the appliance cannot be disposed of the normal waste
when it is out of use. The disposal must be carried out in the specific waste site.
The appliance must be disposed of the European Directive regarding waste of
electronic and electric devices (RAEE).For further information, please contact the
local authorities responsible for disposal.
PROBLEMS AND SOLUTIONS
For environmental reasons the appliance cannot be disposed of the normal waste
when it is out of use. The disposal must be carried out in the specific waste site.
The appliance must be disposed of the European Directive regarding waste of
electronic and electric devices (RAEE).
For further information, please contact the local authorities responsible for disposal.
