10
0. OFF
1. Lit : Continues to light up.
2. Blinking : Repeats lighting on and off at fixed intervals.
3. Shimmering : Brightness of the lighting changes continuously, giving effects of
shimmering.
4. Dimming (adjusted) : Brightness of the lighting changes stepwise.
5. Dimming (fixed) : You can fix the brightness of the lighting 4. Set it to 5 when it
reaches to the brightness level you like.
6. ID lighting (loop) : Repeats blinking in the order of the ID (number) set in the base
module.
7. ID lighting (reverse) : Blinking in reverse ID (number) is added to the pattern 6, and
the round trip of lighting is directed.
8. Sound sensor 1 : Responds to surrounding sounds and music, and directs the light
emission effect.
9. Sound sensor 2 : Same as the Sound sensor 1. There is a difference in microphone
sensitivity.
Control Box SE Lighting effect pattern
0. OFF
1. Lit : Continues to light up.
2. Blinking 1 : Repeats lighting on and off at fixed intervals (long).
3. Blinking 2 : Repeats lighting on and off at fixed intervals (short).
4. Dimming (adjusted) : Brightness of the light changes stepwise.
5. Dimming (fixed) : You can fix the brightness of the lighting 4. Set it to 5 when it
reaches to the brightness level you like.
6. Shimmering : Brightness of the lighting changes continuously, giving effects of
shimmering.
7. Blinking 1 (alternately flashing) : Blinks at fixed intervals (long) alternately with
the module set at 2.
8. Blinking 2 (alternately flashing) : Blinks at fixed intervals (long) alternately with
the module set at 3.
9. Dimming (alternately flashing) : Brightness changes stepwise alternately with the
module set at 4.
Control Box LE Lighting effect pattern
About "DISPLE"
