Nakamichi DELTA 20, User Manual

10

Switch ON the radio, press        or        key on the remote control to select ALARM 1 or ALARM 2, a
blinking        or        icon will be shown on display.

Press        to                 start, press on remote or rotate the VOLUME knob on the front panel to adjust
the setting, then press        or press on the VOLUME knob to confirm and go to the next setup item,
or press        to go back to previous setup item.

If selecting “DAB” and “FM”, set the target alarm station
from the preset or last stations before going to the next step.

If selecting “Once”, set the target alarm date before going to
the next step.

1.

2.

USING THE ALARM

i) Set the Alarm

At standby mode, press the        and        key to activate/deactivate the alarms or switch on the radio,
press        or        key on the remote control to select ALARM 1 or ALARM 2, then press                  to 
select ON/OFF, then press         to save.
The        and        icons light up on display indicating that the alarm is active.

1.

2.

ii) Switching the Alarm on and off

When the Alarm is set to ON and saved, the        or        icon will be shown on display to indicate
alarm is active.

3.

While the alarm is active, press “SNOOZE” key on the remote control or the “STANDBY” key at main unit to
snooze the alarm for several minutes (based on setting, default at 15 minutes, you can press “SNOOZE” on
remote repeat to set next snooze time). The          icon will light up to indicate snooze is active.
To disable snooze function, press “STANDBY” key on remote or main unit again.

iii) Snooze and acknowledge the Alarm