E
.Main Volume Adjust Zone
Adjustment Range: On/OFF,
-59dB～6dB
.
Click the speaker button to mute the main volume.
D
.
Output channel adjustment area
Output channel adjustment area, positive and negative phase of each channel, volume adjustment,
mute, joint adjustment, etc.
"Delay Unit" button: Select the delay unit by clicking the left or right arrow, available in
milliseconds, centimeters, and inches.
C.
Channel divider editing area
Main Function Setup: Channel High & Low Pass Filter Setup
equalizer state parameters and the pass-through mode (the gain of all equalization points is
restored to 0 dB, the frequency and value are unchanged).
Sound adjustment: slide the scroll up and down to adjust the sound level of the channel, or input
the value or scroll the mouse wheel in the sound input box to adjust the sound size. Click the horn
button to switch between mute.
5EN
Positive phase adjustment: Click [0°] or [180
°
] to switch between positive phase and reverse phase.
Delay: set the delay value by scrolling the mouse wheel in the delay input box, or enter the value
to set the delay value.
Reset output configuration: Customizable for channel type.
Lock output type: Locking for the current output channel type is not customizable.
Output left and right joint adjustment: The joint of the left and right
channel data
of the output channel can be copied from left to right, or from right to left.
Adjustable: Filter Type, Frequency point and Q Value
(Gradient or Slope).When the slope is 6dB/Oct, the type
is NULL.
