11 EN
7. Equalizer editing area
a. Reset EQ: It is used to restore the parameters of the all equalizer to the original pass-through
mode (the frequency of the equalizer, the Q value and the gain are restored to the initial value).
b. Restore EQ: Switch between the currently designed equalizer state parameters and the
pass-through mode (the gain of all equalization points is restored to 0
dB, the frequency and
value are unchanged).
c. Click PEQ Mode to switch GEQ Mode. The Q value and frequency cannot be adjusted in the
PEQ Mode interface.
8. Channel EQ editing area
Main function conguration: Equilibrium design of current output channel, 31-band equalization
adjustable: frequency, Q value (response bandwidth) and gain (increasing or decreasing the
frequency response amplitude near the frequency point).
