1-7
SS-9 Main Unit Section
How to reassemble the UD Cam S and UD Cam
How to identify the UD Cam S and UD Cam:
The UD Cam S is used on the left side of the CD Mecha-
nism Ass'y in Fig. A. It has the projections as shown be-
low:
While, the UD Cam is used on the right side of the CD
Mechanism Ass'y in Fig. A, and has not projections.
• Note that they move in the opposite direction each
other. For example, in Fig. A, when the UD Cam S
moves backwards, the UD Cam moves forward.
(1)
Remove the cut washer and pull out the Cam D WW
Gear. Refer to Fig. A.
(2)
Remove the cut washer and pull out the Cam D L
Gear. (Thus, the link between the UD Cam S and UD
Cam is lost.)
(3)
Assemble the UD Cam S on the chassis so that its
rack engages with the gear on the chassis. Then, by
turning the Cam D L Gear on the chassis, align the
edge of the UD Cam S with the edge of the chassis
as shown in Fig. A. (
①
)
(4)
Assemble the UD Cam on the chassis so that its rack
engages with the gear on the chassis. Then, by turn-
ing the Cam Drive Gear on the chassis, align the
edge of the UD Cam with the edge of the chassis as
shown in Fig. A. (
➁
)
(5)
Assemble the Cam D L Gear which was removed in
(2) and engage the cut washer. (Then, the UD Cam
S and UD Cam are linked.) (
➂
) Refer to Fig. B.
(6)
By turning the Cam D L Gear, align the grooves on
the UD Cam S and UD Cam with the center slit of the
chassis as shown in Fig. B. (
④
)
• Fig. B shows the grooves on the UD Cam. Note
that the shape of the UD Cam S's grooves are re-
versed.
(7)
Assemble the Cam D WW Gear which was removed
in (1) and engage the cut washer. (
➄
)
Note: If the assembled UD Cam S or UD cam is mis-po-
sitioned, the UD Plate S Ass'y (L or R) that en-
gages with its grooves cannot be correctly as-
sembled. In this case, you need to repeat above
steps.
Rack
Projection
UD Cam S
Fig. A
Fig. B
UD Cam S
UD Cam
Cam D WW Guide
Cam D L Gear
Cam Drive Gear
Cam D L Gear
Grooves on
the UD Cam
Center Slit of the Chassis
Cam D L Gear
Cam D WW Guide
Summary of Contents for SoundSpace 9
