85
English
④
Setting Maximum Motor Speed
・
Maximum Motor Speed can be set.
・
Allows a safe maximum rotational speed limit depending on the application.
・
The Maximum Motor Speed can set by Control Mode MANUAL or AUTO.
Table.
13
Parameter
Set Contents
Setting of Maximum Motor Speed is enabled.
Setting of Maximum Motor Speed is not enabled.
⑤
Selection of External Speed Control Mode
・
When Control Mode is in AUTO, it is possible select the External Speed Control Mode from Analog Signal
, Pulse Signal
,or Speed Point Signal Parameter
. Speed preset in the control according to
U
1
- U
4
.
Table.
14
Parameter
Set Contents
Set speed by Analog Signal.
Set speed by Pulse Signal.
Set speed by Speed Point Signal.
・
When setting by Analog Signal
, use the External Input / Output Signal " Motor Speed Control Voltage
(Pin No.
23
: VR) ".
・
When setting via the Pulse Signal
, use the External Input / Output Signal " Count Pulse Signal for
Setting Motor Speed (Pin No.
3
: CNT_IN) " and External Input / Output Signal " UP / DOWN Signal for
Setting Motor Speed (Pin No.
15
: UD_IN) ". The motor speed change per pulse is
1000
min
-
1
(rpm).
External Input / Output Signal " UP / DOWN Signal for Setting Motor Speed (Pin No.
15
: UD_IN) " is as
follows :
OFF (Open) : Rotation speed decreases
ON (Closed) :
Rotation speed increases
・
When setting by Speed Point Signal
, select the Speed Point (U
1
- U
4
) by using the combination of
" Speed Point Select
0
(Pin No.
17
: SEL
0
) " and " Speed Point Select
1
(Pin No.
5
: SEL
1
) ".
Table.
15
Speed Point
SEL
1
(Pin No.
5
)
SEL
0
(Pin No.
17
)
U
1
OFF (Open)
OFF (Open)
U
2
OFF (Open)
ON (Closed)
U
3
ON (Closed)
OFF (Open)
U
4
ON (Closed)
ON (Closed)
・
Can setting the different rotation speed in
4
Speed (U1 - U4).
Speed ranges from
1
,
000
-
80
,
000
min
-
1
(rpm) can be set.
