Nakayama EB9000, Operating Instructions Manual

10

in poor weather conditions and when the 

surrounding area is wet. Only work when the 

light conditions are good.

- Always keep the cutting line well away from 

the body, particularly the hands and feet, when 

you switch on the motor and while the motor is 

running.

- Never start the equipment when it is turned 

over or not in the correct working position.

- Never try to stop the cutting device (cutting 

line) with your hands. Always wait until it has 

stopped rotating.

- Switch off the motor and disconnect the plug 

from the mains socket:

•

 Whenever you are not using the equipment

•

 If the equipment is left unattended

•

 When the equipment is being cleaned, 

maintained or is to be inspected

•

 When relocating the equipment

•

 If the power or extension cable is damaged

•

 When you remove or exchange the cutting 

device or manually adjust the length of the 

cutting line

- Check when starting up and working with the 

cutting head that it does not come into contact 

with stones, rubble, wire or other foreign bodies.

- Take care not to provoke injuries on each device 

used for cutting the string lengths. After pulling 

out a new string, always hold the machine in its 

normal working position before switching it on.

- Always be very careful about the cutting device 

as it can cause very serious cuts

- Never try to stop the cutting device (cutting 

line) with your hands. Always wait until it has 

stopped rotating.

- Only use an original cutting line/cutting blade. 

The use of a metal wire instead of the nylon line/

blade is impermissible.

- Do not use the equipment to cut grass that is 

not growing on the ground, e.g. grass on walls, 

rocks, etc.

- Do not traverse gravel paths while the 

equipment is operating.

- Do not operate the equipment in the vicinity of 

inflammable liquids or gases as this could give 

rise to the danger of a fire or explosion.

- Store the equipment in a dry place that is not 

accessible to children.

- Only use spare parts and accessories that 

have been supplied or recommended by the 

manufacturer.

- Never try to repair the equipment yourself. 

All work that has not been listed in these 

Instructions must only be carried out by an 

authorised servicing agency.

Electrical safety

CAUTION! The following states how to avoid 

accidents and injuries due to electric shock:

- Before each usage, check the mains power 

cable and the extension cable for damage and 

signs of aging. Do not use the device if the cable 

is damaged or worn.

- Always keep the extension cable well away 

from the cutting tools. Should the power cable 

become damaged during work, then instantly 

disconnect the power cable from the mains.

DO NOT TOUCH THE POWER CABLE BEFORE IT 

HAS BEEN DISCONNECTED FROM THE MAINS!

- If the power cable for this equipment 

is damaged, it must be replaced by the 

manufacturer, a customer service agent of the 

same or a similarly qualified person in order to 

prevent hazards.