Nakayama EB9000, Operating Instructions Manual

 13

- Avoid contact with obstacles (stones, walls, 

fences, etc.) as this will rapidly wear out the lines.

- Do not deposit the cutting head on the ground 

during operation.

- Ensure that the cutting head has stopped before 

you deposit the equipment on the ground.

- Cut the grass by swaying the trimmer sideways 

to the right and left. Cut slowly, keeping the 

appliance inclined forward slightly when cutting. 

Cut tall grass by a series of levels from top to 

bottom.

8. Technical data

voltage:                                                 230-240V~ 50Hz

power:                                                                       900 W

Max. speed of spindle:                                8000 min

-1

Sound power level L

wA

:                              99.27 dB(A)

Sound pressure level L

PA

:                              90.2dB(A)

vibration:                                                          6.795m/s

2

                                                                            K=1.5m/s

2

Dia. cutting head:                                               360mm

length of nylon line:                                                   8m
Dia. cutting blade:                                              230mm

Noise and vibration values have been determined 

according to the standards and regulations 

mentioned in the declaration of conformity.

Technical and optical changes may be

undertaken in the course of further development 

without notice. All dimensions, references 

and information in this instruction manual are 

therefore not guaranteed. Legal claims made on 

the basis of the instruction manual can therefore 

not be considered as valid.

The stated vibration emission value was 

measured in accordance with a standard testing 

procedure and may be used to compare one 

power tool to another.

The stated vibration emission value may also be 

beyond the cord cutter.

7.4 Exchanging the line spool

- Disconnect the plug from the mains socket.

- Turn over the trimmer so that the cutting head 

is facing upwards.

- Remove the line spool from the cutting head.

- Insert the new spool with the smooth side 

facing upwards in the cutting head.

7.5 Install pack strap (B11).

- Find out the Pack strap(12). It is a black color 

swathe.

- Press spring handcuff down and then handcuff 

the plastic buckle holes of the lock hump. Then 

loosen your fingers.

The PACK STRAP connected a metal and spring 

handcuff. When you are pressing the spring, it 

will be open. Loosened it was be closed. The end 

of shoulder grip is riveting a red tape and a metal 

pin. The pin has safety protection function. When 

the work environment or the machine had an 

accident  situations, you can pull the pin out. This 

design allows you leave to the dangerous safely 

and quickly.

7.6 Cutting grass

WARNING. Danger of injury!

- Do not cut moist or wet grass.

- Before starting the trimmer check that the 

cutting head will not come into contact with 

stones, rubble or other foreign bodies.

- Switch on the trimmer before you approach the 

grass that is to be cut.

- Always trail the extension cable behind you. 

Do not pass the operating trimmer over the 

extension cable as the cable could be damaged.

- Do not overload the trimmer during operation.