Nakayama EH5100, Manual

EN

WWW.NAKAYAMATOOLS.COM

4

Description of symbols

Symbols are used in this manual to attract your attention to possible risks. The safety symbols and the explications which accompany them must be perfectly 

understood. The warning themselves do not prevent the risks and cannot be a substitute for proper methods of avoiding accidents.

Before any use, refer to the corresponding paragraph in the present manual.

This symbol, before a safety comment, indicates a precaution, a warning or a danger. Ignoring this warning can lead to an accident for yourself 

or for others. To limit the risk of injury, fire, or electrocution always apply the recommendations indicated.

Conforms to European standards.

These symbols indicate the requirement of wearing ear protection, eye protection gloves robust and footwear when 

using the product.

Do not expose and operate the tool in rain.

Always maintain a sufficiently safe distance.

Remove the plug from the mains immediately if cable is damaged or cut.

Recycle unwanted materials instead of disposing of them as waste. All 

tools, hoses and packaging should be sorted, taken to the local recy

-

cling centre and disposed of in an environmentally safe way.

Double insulated for additional protection.

Technical Data

Rated Voltage:

230V~50Hz

Rated Power: 

550W

Cutting length: 

60cm

No-load speed: 

3300/min

Blade type:

Dual action

Tooth space:

34

mm