Nakayama ET6000, Quick Start Manual

EN

WWW.NAKAYAMATOOLS.COM

4

21. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of 

the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the 

appliance.

22. The nylon line will run on for a few seconds after the tool is switched off ! Do not touch moving hazardous parts before 

the machine is disconnected from the mains and the moving hazardous parts have come to a complete stop.

23. The type of extension cord to be used shall not lighter than H05VVF or H05RNF.

24. Always wear substantial footwear and long trousers while operating the machine.

25. Always disconnect the machine from the power supply.

- Whenever the machine is left by the user

- Before cleaning a blockage

- Before checking, cleaning or working on the machine

- After striking a foreign object to inspect the machine for damage

- If the machine starts to vibrate abnormally, for immediately check

26. Never to operate the machine with defective guards or shields, or without safety devices, or if the cord is damaged or 

worm.

27. Do not connect a damaged cord to the supply or touch a damaged cord before it is disconnected from the supply for the 

reason that damaged cords can lead to contact with live parts.

28. Disconnect the supply immediately in the event of accident or breakdown.

29. Connect the machine only to a supply circuit protected by a residual current device with a tripping current of not more 

than 30 mA.

30. Avoid using the machine in bad weather conditions especially when there is a risk of lightning.

Residual risks

Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise 

in connection with the tool’s construction and design:

1) Damage to lungs if an effective dust mask is not worn.

2) Damage to hearing if effective hearing protection is not worn.

Health defects resulting from vibration emission if the power tool is being used over longer period of time or not adequately 

managed and properly maintained.

WARNING! 

This machine produces an electromagnetic field during operation. This field may under some circumstances 

interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with 

medical implants to consult their physician and the medical implant manufacturer before operating this machine.

Assembling

Assemble the protective cover and edge guide (see Figure)

1) Rotate the fixed trestle, Using 2pcs ST4 x 14 screw to 

install edge guide

2) Hold the machine shelf, fitting the protective cover in 

the machine shelf.

3) Align the protective cover and the machine shelf 

together with 4pcs ST4 x 14 screw.

Assemble auxiliary handle (see Figure)

Assemble the auxiliary handle to the mount provided, 

then secure the auxiliary handle with the help of the 

screw and the adjustment lock provided.