9. Do not put batteries in water.
10. Do not charge near fire or directly under the sun.
11. Do not drive nails into the batteries, do not hit the batteries with a hammer, do not step on or throw away the batteries.
12. Do not use batteries with severe visible damage or deformation.
13. Do not weld batteries directly.
14. Do not charge batteries reversly, connect them in an anti-polar position or discharge them excessively.
15. Do not plug batteries into a vehicle’s recharge or cigarette lighter socket.
16. Do not use the batteries on non-assigned equipment.
17. Do not make direct contact with lithium batteries.
18. Do not put batteries in high-temperature or high-pressure containers, such as microwave ovens, etc.
19. Do not use leaking batteries.
20. Do not let children to come into contact with batteries
21. Do not place batteries under direct sunlight (or in cars under direct sunlight), it may cause overheating, damage the battery function and shorten its lifespan.
22. Do not use batteries in static spaces (exceeding 64V).
23. Do not use the batteries if there is corrosion, unpleasant smell or any other irregularities.
24. If there is battery contact with skin or clothing, rinse with clean water.
25. If electric pruning shears are not used for a long period of time, recharge it fully before using.
SAFETY PRECAUTIONS
1. Always work in a clean and bright space. Chaotic and/or dark workplaces may lead to accidents.
2. Do not operate the electric pruning shears under humid or flammable conditions.
3. Operate the tool away from children or other audience to avoid distractions that may lead to damages or other accidents.
Workplace conditions
1. The battery socket of the electric pruning shears must be compatible with the battery connecting plug. Do not disassemble or rebuild socket or plug in any
way.
2. Do not expose the electric pruning shears to rain or any humid environment. Water or other liquids may increase the danger of short-circuit or electric shock
and cause damage or other harm.
3. Do not abuse electric wires. Do not use the wires to lift or pull the electric pruning shears in any way. Do not pull on the plug. Keep the electric pruning
shears away from any sharp edges or moving parts. Do not use chargers when wires or plugs are damaged. Damaged and intertwined wires will increase the
risk of electric shock.
Electric safety
1. Be alert. When operating the electric pruning shears, concentrate only on the work. Do not operate when tired, after consuming alcohol or under medication.
While operating, any distractions may lead to serious injury.
2. Use appropriate safety gear. Αlways wear safety goggles, face mask, non-slip safety shoes, helmet and earplugs to reduce chance of damage or injury.
3. Before starting the electric pruning shears, remove all adjustable keys or wrenches. Wrenches or keys left on the rotating parts may cause damage or injury.
4. Do not overstretch your hands when operating. Keep you hands away from the shearing areas. Make sure that any material or surface under the shearing
area will not be damaged by the blades. Stand on firm ground and keep good balance while working to avoid accidents.
5. Dress suitably. Do not wear loose clothing or accessories that can get tangled in moving parts. Keep your hair, clothing and sleeves away from any moving
parts.
Personal safety
1. When non-shearing objects are placed in the opening, immediately release the trigger. The moving blade will automatically return to the open position.
2. When shearing objects are too tough to cut, release the trigger promptly and the moving blade will automatically return to open position.
3. When batteries will not charge, first check whether the charger is correctly attached to the product. Then check that the charging voltage is in accordance
with the voltage on the type plate.
4. In case of electric or mechanical faults, close the switch off immediately.
5. In cases of not operating under present instructions, the batteries may leak liquid. Keep away from such liquids. If it comes to contact with skin by accident,
rinse with clean water. If it comes to contact with eyes, rinse with clean water and immediately seek medical advice. Liquid discharged from batteries may
cause irritation or burns.
Other safety measures
ENVIRONMENTAL DISPOSAL
In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of
recyclable materials and can be disposed accordingly. The tool's plastics components are marked according to their material, which makes it possible to remove
environmental friendly and differentiated because of available collection facilities.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
5
WWW.NIKOLAOUTOOLS.GR
EN
Summary of Contents for Pro EC1300
