background image

For  reasons  of  safety,  replace  a  damaged  petrol 
tank and/or tank cap.

Risk of burns!

The  exhaust  as  well  as  the  areas  around  the 
exhaust may be very hot.

 

Replace damaged mufflers.

Do  not  change  the  governor  settings  of  the 
engine.

Never  leave  a  combustion  engine  running  in  an 
enclosed space 

– toxic hazard!

Safety instructions for the cutter bar

 

Some  of  the  blades  on  the  cutter  bar  are  bare. 
These  can  lead  to  serious  injuries  if they  are  not 
handled with care.

Always  mount  the  blade  guard  on  the  cutter  bar 
for the following:

 mounting the cutter bar onto the mower 

 cleaning the mower 

 during transport and storage of the mower 

 during work on the cutter bar 

Replace damaged blade guards.

Maintenance and storage

 

Before performing any work on the mower:

 

switch  off  the  engine,  wait  until  the  cutters  have 
stopped  moving  and  then  pull  off  the  spark  plug 
connector.

 

Always  wear  safety  gloves  during  work  on  the 
cutters.

 

If  there  is  petrol  in  the  tank,  never  store  the 
mower  in  buildings  where  petrol  vapours  can 
come into contact with naked flames or sparks 

 

Risk of explosion!

The petrol tank must be emptied outdoors only.

Allow the engine to cool before storing the mower 
in an enclosed space.

 

Do not spray the mower with water.

The  mower  must  be  repaired  by  an  authorised 
specialist company only.

Spare parts and accessories

 

Use genuine spare parts and accessories only.

We reserve the right to make changes to the 
design and construction without prior notice.

Non-permitted users:

Persons who are not familiar with the operating 
manual, as well as children, adolescents under 
the age of 16 and persons under the influence 
of alcohol, drugs or medication must operate 
the mower.

MACHINE DESCRIPTION(FIG.A)

 

1.Throttle lever
2.Handlebar
3.Ex-arm-fixer
4.Muffler
5.Shield

 

6.Cutting
clutch 7.Engine
8.Wheel
9.Rocker frame

 

10.Cutting high regulator
11.Cutting bar

Summary of Contents for SM8700

















Reviews: