Nakayama SP1200, Manual

EN

WWW.NAKAYAMATOOLS.COM

2

Dry run

The end should not be 

in the water

Safety Instructions

1. Don’t run dry. 

2. Don’t dip the end of the wire in the water. 

3. Don’t mistake voltage, also connect white wire to +(plus), black wire to - (minus). 

In case connecting another wire, use over 0.75mm2. 

4. Don’t pull the wire. 

Don’t handle roughly. 

Don’t drop the pump. 

5. In case using the pump in discharging of Bilge water, the end of the delivery hose should be up of 

the water surface. 

Otherwise, by syphoning, the water will flow back into the bottom of the boat. 

6. Can use in a little bit oil mixed water, but don’t use in gasoline, kerosene, machine oil , and sol

-

vents. 

7. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. 

Please check the strainer occasionally. 

Application 

1. Pumping out water form ice 

2. Pumping fresh water in preserve 

3. Discharging of Bilge water 

4. Emergency pumping on the boat 

5. Washing on the deck 

6. Water exchanging in fish farm 

7. For camping use 

8. Car washing 

Installation 

Install the pump body (Strainer cover) on the desired locations. 

Use 4- M4X12 screws to fix the body. 

Characteristics 

Large delivery volume, high delivery pressure, aimed the maximum of this class.

Continuous running in the water all right.

Unique motor cooling system enables continuous running. 

Double mechanical seal system equipped guarantees the complete shaft sealing. 

Using 304 Stainless, saltwater-proof aluminium alloy, anti-shock PBT plastics  assure long durability, perfect against salt-water 

corrosion. 

Small size, light, compact, easy to handle. 

Strainer can be quickly removed without tool, makes east to clean inside. 

Wire and pump-connection part is strengthen by chain, this protects the  grand part and prevents water leakage into motor 

room.