3.1.2 Set Time/Date (wizard)
The date and time are displayed as dd-mm-yyyy and hh:mm AM/PM with the first value,
dd, active (flashing).
Adjust each value with the Select control. As each value is set by pressing the Select
control, the next value becomes active ready for adjustment.
Auto-update
Auto-update works with data sent over the Internet. The clock is only updated when in a
corresponding mode, so it is best to select a mode you use regularly.
DAB
and FM use time signals broadcast with radio transmissions.
Network
uses a time signal sent from the Internet radio portal when in any
network-connected mode.
1.Select Update from DAB, Update from FM, Update from Network or No update.
2. If you are updating from the network, set your time zone.
3. If your country uses daylight saving, the automatically updated time from the network
may be wrong by one hour. When daylight savings are in effect (during the winter), turn
on the Daylight savings option to rectify this.
Note that if you are updating the time from DAB or FM, the Daylight savings option has
no effect on the clo
ck‟s time.
MK100 will auto-update from the selected source when time information is available.
Manual set
