A3LA-RG Guide Version B
Document Number: 451-93156-009B
99 of 180
B.99 +CICCID
–
R
EAD
ICC
ID
FROM
SIM
Exec Command:
+CICCID
Query the status ICC ID of the SIM:
+CICCID
This returns the 19 or 20-digit Integrated Circuit Card Identification of the SIM.
Note:
This value is cached from the SIM and thus is not available until the caching has
completed ~5-10 seconds after startup.
B.100 +CLIP
–
C
ALLING
L
INE
I
DENTIFICATION
P
RESENTATION
Exec Command:
+CLIP=<n>
Note:
While this command is implemented in the A3LA-RG, it may not yet be
supported in the Iridium network. Stand by for an Iridium Technical Bulletin
announcing network support for this feature.
This command controls the presentation of the Calling Line Identity of the calling party
in a mobile terminated call via the +CLIP unsolicited result code. <n> controls only the
presentation of the unsolicited result code; the delivery of Calling Line Identity
information to the A3LA-RG is controlled by the provisioning of the CLI Presentation
supplementary service in the network where <n> is:
0 Disable the +CLIP unsolicited result code. (default)
1
Enable the +CLIP unsolicited result code to be sent to the DTE following
the RING result code when a mobile terminated call is received and Calling
Line Identity information is present.
The unsolicited result code has the format:
+CLIP:<number>,<type>
where:
<number> is the phone number of the calling party in “quotes”, in the format specified
by <type>.
<type> indicates the type of number:
129
Dial string without the international access character
