AL3A-RM User Guide Version B
Document Number: 451-93156-002B
70 of 172
B.62.1
D>
–
D
IRECT
D
IAL
F
ROM
P
HONEBOOK
The A3LA-RM and SIM contain phonebooks which have a phone number and an
alphanumeric field for each phonebook entry location. The use of V.25ter dialing
command ensures that direct dialing from phone memory and SIM phonebook is
possible through ordinary communications software which just gives the phone
number field to be filled and then uses the D command to originate the call. Available
memories may be queried with Select Phonebook Storage test cCPBS=?,
and location range for example with Read Phonebook Entries test cCPBR=?.
Execute commands:
D><str>[;]
Originate call to phone number which corresponding alphanumeric field is <str> (if
possible, all available memories should be searched for the correct entry). <str> is of
string type value and should enclosed by ““ (e.g., “John”).
D> mem<n>[;]
Originate call to phone number in memory mem entry location <n> (available
memories may be queried with Select Phonebook Storage test cCPBS=?).
mem can be one of the following:
FD
SIM fixed dialing phonebook
LD
Last ten calls dialed phonebook
ME
Phone memory
MT
combined phone and SIM phonebook locations
SM
SIM phonebook
D><n>[;]
Originate call to phone number in entry location <n> (the command Select Phonebook
Memory SCPBS setting determines which phonebook storage is used).
B.63
H
N
–
H
ANGUP
Control the hook switch. This command is used to clear a data call connection. It is
also used to clear a voice call connection when the A3LA-R/RM/RGS has originated
the voice call with the ATD dial command or terminated the voice call with the ATA or
ATS0=n answer command.
