SHOUT 3G User Guide (Version 1.0.0)
12
The following accessories are included with the SHOUT 3G.
The SHOUT 3G is shipped with its internal Lithium-Ion battery partially charged.
User should fully charge the 3G before use. There are two ways to charge the 3G.
One is to use the supplied AC wall adapter. The other is to connect to a standard
USB device. With the AC wall adapter, the charging time is approximately five
hours. Charging time using a USB port depends on the type of USB port. USB 1.0
should be able to charge the 3G in about a day assuming the port is capable of
producing an output current of 100mA. USB 2.0 can charge in about 8 hours
assuming the current output of 0.5A. A common 2 Amp USB wall adapter can
fully charge the device in under 3 hours. NAL Research offers 12VDC and 28VDC
chargers sold as separate items. For solar charges, NAL Research recommends
any of Solio®’s products (
).
The 3G has a battery status symbol on top right corner of its touchscreen
indicating the battery is being charged. A message will appear when charging is
complete. The device can be safely operated and does not need to be turned off
while charging. The charging cycle will complete quicker when the device is shut
C
HARGING THE
B
ATTERY
A
CCESSORIES
USB-to-micro USB Cable
AC Wall Adapter
Manuals and Software
WARNING!
All batteries can cause property damage, injury or burns if a
conductive material, such as jewelry or keys, touches exposed
terminals. The material may complete an electrical circuit and become
extremely hot. To protect against such unwanted current drain,
exercise care in handling any charged battery, particularly when
placing it inside your pocket, purse or other container with metal
objects.
User should not disassemble the SHOUT 3G for replacing battery. It
should be returned to NAL Research for services. Risk of explosion if
battery is replaced with an incorrect type. Dispose of the batteries
(3G) according to local, state and federal regulations or laws.