SHOUT 3G User Guide (Version 1.0.0)
28
As with the contact list, SatTerm is used to create and save canned messages into
the SHOUT 3G’s memory. During setup SatTerm requires connectivity between
the 3G and a NOC server to synchronize the lookup table of short codes. Sending
canned messages saves bandwidth and airtime cost because it is only short codes
that are being transmitted instead of the entire message body. The short codes
are defined by application developers and not by the 3G.
The Enter Text option lets user create free-text messages with three on-screen
keyboards. If a canned message is previously selected then the entered free-text
will be appended to the canned message.
After finish selecting a canned message and/or composing a free-text message,
user can either Send the message or Save as Draft. If Send is selected, a Success
screen will appear to indicate that the message has been added to the Outbox.
The 3G must then be held with the antennas having full view of the sky if the
Iridium link is used. If Inc GPS option is turned on then GPS location will be added
to the message. Messages with GPS location takes longer to complete since the
3G has to acquire a GPS fix.
The Contacts is an address book with a list of contacts created and saved into the
SHOUT 3G’s memory using NAL Research’s SatTerm software. During setup
SatTerm requires connectivity between the 3G and a NOC server to synchronize
C
ONTACTS