SHOUT nano User Guide Version A
Document Number: 451-92681-001A
51 of 60
A
PPENDIX
B:
U
PGRADING THE
F
IRMWARE
The SHOUT nano firmware can be upgraded using a PC connected to the USB port of the device.
The device drivers support Windows XP, Windows Vista, and Windows 7.
1.
Run the NAL USB Bootloader program.
Figure 26: NAL USB Bootloader
2.
With a USB cable attached to a computer and the device, select the Start Flash Mode
button.
3.
Wait until it activates and then select Open Hex File.
4.
Browse and select a valid NAL device BIN file. NAL Research makes the BIN file available
upon request.
5.
Once the BIN file is loaded, select Program/Verify.
6.
Wait for the programming to complete.
7.
Select Reset Device. The new firmware is now loaded on the device.