3D TRASAR
5500 - Installation & Operation Manual
521-OM0108.88
Copyright
2009 Nalco Company
2-27
Technical Help
(630) 305-CHEM
2.6.2 pH Probe Installation
Install the pH probe as follows:
STEP 1
-
Carefully unpack the pH probe.
STEP 2
-
Apply 5 revolutions of Teflon tape to
the pH probe threads.
STEP 3
-
Hand tighten the probe in the
threaded tee location indicated in
Section 2.6
STEP 4
-
Connect pH probe to pH cable (cable
is labeled pH.)
Install probes
Install probes and attach
connectors as shown.
Tighten swage fitting fully.
ORP Probe
Install probes
Install probes and attach
connectors.