3D TRASAR
5500 - Installation & Operation Manual
521-OM0108.88
Copyright
2009 Nalco Company
2-35
Technical Help
(630) 305-CHEM
2.7.3 Controller Wiring Details (con’t)
Notes:
1. Relay voltage jumpers (terminals 4 & 5) -
Remove for non-powered output. Refer 2.7.8
and 2.7.9 for control relay details.
2. Control relays fused at 2.5 amps.
3. Alarm relay fused at 1.0 amps.
5. Board traces and contacts rated at 5 amps
(85-250 VAC).
6. For motor driven pumps a separate motor
starter must be used.
Wiring