521-OM0108.88
Copyright
2009 Nalco Company
3-1
Technical Help
(630) 305-CHEM
3D TRASAR
5500 - Installation & Operation Manual
Section 3: 3D TRASAR Configurator
The configurator program is used to:
• Configure the controller
• Establish direct and modem connections to the 3D TRASAR controller
• Download data from the 3D TRASAR controller
• Update controller firmware
!
NOTE
: Although many settings can be changed through the 3D TRASAR controller
keypad, the configurator must be used for initial controller setup and to make
changes to control methods.
3.1 PC System Requirements
• The 3D TRASAR controller configurator software requires a PC running the Windows 2000
or Windows XP operating system (it is not supported on other versions of Windows at this
time).
NOTE
: The configurator software operates optimally when Lotus Notes is installed on
your PC. Lotus Notes is used as a means of obtaining the most recent data for use in the
configurator. The configurator also has the capability of generating email messages (with
the user’s consent), which are sent via the user’s Notes mailbox at the next replication.
However, the program has been designed to operate in the absence of Notes with a more
limited capability.
• For direct connection to a 3D TRASAR controller an Ethernet adapter is required.
• For remote dialup access to a 3D TRASAR controller a modem is required.
3.2 Installing the Software
For Windows 2000 users, insert the CD and double click on the
Setup.exe
icon. Follow
the on screen steps to complete the installation.
For Nalco Windows XP users, the configurator program should be pre-installed. To open
click
Start, Programs, Nalco Software, 3D TRASAR, 3DT Configurator
.
If the program is not pre-installed, it can be downloaded from SMS. To download, click
Start, Programs, System Manager
. Scroll through programs, locate
Nalco 3D TRASAR
Configurator
.
A second program, 3Cdaemon, will also be installed. This is a TFTP server program used
only for controller software upgrades.
!
