background image

521-OM0108.88

Copyright 

 

2009 Nalco Company

4-2

Technical Help

(630) 305-CHEM

3D TRASAR

5500 - Installation & Operation Manual

4.1.3   The Graphical Icons

The graphical icons that will appear in the display are listed below with a brief explanation of their

meaning.

The screen on the left has several ICONS that

indicate a particular function. Refer to the

symbols below for more details.

• Relay is “ON” in Auto mode (no icon indicates Auto “OFF”)

• Move to next/previous screen (use arrow keys)

• Relay is “OFF” in Manual mode
• Relay is “ON” in Manual mode
• Relay is “OFF” in Failsafe mode
• Relay is “ON” in Failsafe mode

• Scroll through list of choices (use arrow keys)
• One or more alarms is active (press Alarms to view)
• Modem connection is established (incoming or outgoing)
• No flow condition exists (delay for alarm)
• Interlock contact is opened (immediate alarm)

Summary of Contents for 3D TRASAR Series




















































































































































































































































Reviews: