Page
After removing the shipping brackets, install the supplied safety rubber skirt (D) and
skirt stay (F) to the upper base assembly as described below.
NOTE: The safety rubber skirt is to prevent hands or feet being trapped by the
moving parts. Be sure to install the safety rubber skirts.
1)
The safety rubber is installed on the outside of each seat assembly. i.e.on the left
of the left hand seat and on the right of the right hand seat.
2)
Install the safety rubber and skirt stay using three security screws (M5x20).
NOTE: Ensure that the gap between the bottom of the skirt and the cover plate is no
greater than 1.5mm.
7
