23
2
1
1
3
3
2
3
Remove the brushes by pressing the button
placed on the left side of the machine.
Use a damp cloth to clean the internal sides
of the machine while checking that
seals are not clogged.
TROUBLESHOOTING TIPS
The following are examples of some problems that may arise.
If after completing the verifications listed below, you do not achieve positive outcomes,
please contact our service support immediately.
The fresh water tank loses
Check that the water valve of the cable is fully screwed to the tank.
Check that the drive cable anchored to the lever of the liquid distribution is not too taut.
Check that the tank is fully intact and that there are no holes and/or cracks.
The machine does not distribute well the wash water
Make sure that the drip tray placed under the cover is not clogged. Check that the transparent
tube is not clogged or crimped.
The machine does not collect water
Check that the waste is properly inserted and that the cover is completely closed and attached to
the body. Check that the wash water drops on a regular basis when you pull the lever. Check that
the brushes are not too worn.
In case of prolonged inactivity, carry out at least 1 battery recharge cycle every 3 months.
If not used for more than 3 months, make sure the battery is completely discharged and then
carry out a complete recharge cycle.
