Page 69
7-5
Replacing the Screen Guard
1.
Seperate the Monitor Base Assy from the Front Assy.
(see 5-2 page 35)
2.
Remove the Signboard Assy.
(see 5-3 page 36)
3.
Remove the Front Panel.
(see 7-2 page 66)
4.
Remove 2off security screw (M5x25) and 4off pozi head screws (M5x16), and
remove the Monitor Mask.
5.
Remove 18off Whizz nuts, and remove the two pairs of Guard Brackets (A),(B),
and remove the screen guard.
6.
Reassemble in reverse order.
Note: The front and rear sides of the Screen Guard are different. Ensure that the
Screen Guard is re-fitted the correct way round.
Guard bracket (A)
Guard bracket (B)
Whizz nut
Screen guard
Projector mask
(rear side)
Whizz nut
Whizz nut
Pozi head screw (M5 x 16)
Security screw
(M5 x 25)
Projector mask
Security screw
(M5 x 25)
